Search for: All records

Abstract Swarm manufacturing is an emerging manufacturing paradigm that employs a heterogeneous swarm of robots to accomplish complex hybrid manufacturing tasks. Cooperative 3D printing (C3DP), a specialized form of swarm manufacturing, enables multiple printers to collaboratively produce large-scale parts, addressing key tradeoffs in additive manufacturing, such as size, speed, quality, and cost. A fundamental challenge in C3DP is ensuring collision-free, time-optimal printing in a shared workspace. This is a complex problem that can be influenced by factors such as the number of printers, part geometry, printer positioning, mobility, and kinematics. In this article, we present SafeZone*, a collision-free and scalable C3DP framework that optimizes printing time by co-considering the geometry (area and shape) and topology (space-connectivity) of a shared workspace during layer partitioning. We first establish a conceptual framework to mathematically represent the topology of a layer through partition graphs. Then, we use a Voronoi tessellation within a constrained optimization framework to control the partition graph and minimize makespan. The Voronoi sites are associated with printer locations, allowing the framework to integrate physical constraints and facilitating solutions for systems with robotic manipulators. Physical testing in a four-printer scenario with robotic arms confirms that SafeZone* enables collision-free printing, resulting in a printing time reduction of 44.63% when compared to the single-printer scenario. Finally, numerical studies reveal trends in the optimal solutions concerning the chromatic number of their resulting partition graphs and the distribution of the printing areas among printers. 

Abstract We present NoodlePrint, a generalized computational framework for maximally concurrent layer-wise cooperative 3D printing (C3DP) of arbitrary part geometries with multiple robots. NoodlePrint is inspired by a recently discovered set of helically interlocked space-filling shapes called VoroNoodles. Leveraging this unique geometric relationship, we introduce an algorithmic pipeline for generating helically interlocked cellular segmentation of arbitrary parts followed by layer-wise cell sequencing and path planning for cooperative 3D printing. Furthermore, we introduce a novel concurrence measure that quantifies the amount of printing parallelization across multiple robots. Consequently, we integrate this measure to optimize the location and orientation of a part for maximally parallel printing. We systematically study the relationship between the helix parameters (i.e., cellular interlocking), the cell size, the amount of concurrent printing, and the total printing time. Our study revealed that both concurrence and time to print primarily depend on the cell size, thereby allowing the determination of interlocking independent of time to print. To demonstrate the generality of our approach with respect to part geometry and the number of robots, we implemented two cooperative 3D printing systems with two and three printing robots and printed a variety of part geometries. Through comparative bending and tensile tests, we show that helically interlocked part segmentation is robust to gaps between segments. 

Abstract Swarm manufacturing (SM) is an emerging manufacturing paradigm that employs a heterogeneous swarm of robots to accomplish complex hybrid manufacturing tasks. Cooperative 3D Printing (C3DP), a special form of swarm manufacturing, uses multiple printers to print large-scale parts cooperatively and aims to tackle key challenges in the additive manufacturing industry, such as trade-offs among size, speed, quality, and cost. A fundamental challenge in C3DP is how to achieve collision-free, time-efficient printing when multiple printers operate in a shared workspace. This is a complex problem since the solution may depend on a myriad of factors, such as the number of printers, part geometry, printer positioning, mobility, and kinematics, or whether the printing path pre-determined. In this paper, we present SafeZone, a collision-free and scalable C3DP framework that aims to minimize printing time by considering both the geometry and topology (space-connectivity) of the resulting workspace when segmenting the part layer. To achieve this, we use a guided Voronoi tessellation that can only produce degree-3 partitions, which we show to have optimal scheduling properties based on the chromatic number of the resulting partition graph. The sites of the Voronoi tessellation are constrained to only lie on the boundary of their convex hull, thus facilitating collision-free operation in C3DP systems with robotic arms. We demonstrate through physical testing in a 4-printer scenario with SCARA arms that SafeZone can produce collision-free prints, resulting in a printing time reduction of 44.63% when compared to the single-printer scenario. Finally, we show how the partition created by our methodology has a printing time reduction of 22.83% when compared to a naive choice which does not consider workspace topology. 

Abstract One of the major challenges in 3D printing is its lack of scalability both in size and speed, which directly impacts its economic feasibility for large-scale industrial applications. Cooperative 3D printing (C3DP) is an emerging paradigm that aims to address these issues by employing multiple mobile printers that work in parallel. However, a crucial step in enabling C3DP is the development of a collision-free communication framework between the printers during the manufacturing process. Many C3DP systems found in the literature develop solutions for collision-free printing that are specific to the setup being used, thus not allowing the solution to be transferred to other similar systems. In this paper, we formulate a general framework that generates four distinct collision-free communication strategies to enable arm-arm coordination for C3DP using robotic manipulators. We considered collisions both between the arms with themselves and between the arms and the part being printed. The strategies are general in that they are agnostic to the number of printers, their kinematics, and their spatial configurations in the manufacturing environment. We conducted a study of the four strategies using a two-printer scenario and then physically validated them with four test cases of varying geometries. The results show that the strategies successfully produce printed parts while being collision-free. The makespan reduction using our strategies when compared to a single printer varied from 20% to 42% depending on the strategy used. Finally, we discuss the limitations of the framework, as well as future research directions.